I’m going to do a basic series of common misconceptions and decorating advice posts to assist a home owner who may be attempting to under take painting and decorating themselves, hopefully it may assist them, or at the very least minimize the decorating faux-pas our trade has to correct on a daily basis from well meaning DIY’ers
In one respect its my way of putting a little back from the trade I have worked hard in for over thirty years, even I’m still learning new things every day. From the current increase in water-based products, to changes in fashion from wall paper borders to bright coloured feature walls, the ever growing list of new paints manufacturers invent to fill niche markets, to the advances in dust free sanding systems there is generally something new happening
Another aspect is perhaps it might encourage an interest within the trade, sadly there will be a shortage of proper time served trades people in the future, not just in painting and decorating but in all trades and with our elderly population slowly increasing, they will need reputable trades people to undertake work in the future. Yes its a shock to the system actually coming to work for the first time after a school enviroment, but providing they are willing to learn, skills taught hands on will stay with them for the rest of their lives and possibly provide them with a rewarding way to earn a living in the future.
So look out for posts #askapainter hashtag or if there is anything decorating related I may be able to answer, feel free to ask a question below, I will try my best to answer within a couple of days.The video that accompanies this post is a bit of light heart fun, mainly jobs that are in progress so you can at least view the variety of work we do.
Those that know me will be aware I am a quite a traditionalist in many ways. I was taught about old fashioned techniques while serving my time. I remember it well “Roller…roller…never mind those new fangled things get that 6inch flogger brush in your hand and paint that room properly, make sure it’s laid of accurately to” Dad would say
So it’s the same story with preparation which after all is at the heart of our trade. After exploring the virtues of dust free sanding via mechanical means and trying to assess if it could be done on a budget I would like to take it a step further. Going back to my traditional roots let’s try sanding things by hand.
Okay now I have your full attention I wasn’t actually recommending going right back to the good old days of quiors of glass paper on cork blocks sanding until tips of your fingers bled and room was completely full of dust. There is actually a modern alternative which is extremely useful.
As mentioned in the previous blog Mirka has a good name in mechanical sanding. What decorators use now are basically derivatives of machines used within the car body repair industry. The abrasives that accompany them are Abranet and the first time I used them was on this hand sander, attached to my trusty Henry hoover via the hose supplied with the starter kit, or the Handy kit
You have the benefits of an almost dust free environment, the excellent abrasive properties of Abranet and using these also has the added advantage of manual input from the user. Think along the lines of the 80’s film Karate kid.
So if you would like to improve your working atmosphere I would definitely type these into your interweb search thingy and notice the difference.
Decorators of my generation or older were probably not as aware of some of the potential damage done to our bodies, what with the lead in paint or worse chemicals or solvents emitting toxic fumes. Then there were textured coatings and other substrates containing asbestos powder. All of which used to be abraded by hand atomizing a contaminated dust into the atmosphere we were working amongst. Dust free sanders can help combat these concerns.
Brief Description
I have mentioned before about me being a bit of a decorative dinosaur, in many aspects I still try to keep alive traditional skills where ever I can. This does not however mean I also do not embrace new techniques or ideas. For the last five years I have encouraged us to become totally water based on internal jobs and within the next couple of years I believe exterior jobs will evolve naturally along the same route.
Health and safety is an integral part of any business no matter how big or small we happen to be, of course it used to be called common sense which sadly met its demise. Modern decorative apprentices are taught varying amounts of health and safety depending on what college they attend. In my personal experiences most of it suits site work or industrial scenarios more than the domestic market I tend to focus 85% of my business on.
Yes it’s important to learn how to lift correctly, but funny how lifting a ladder isn’t taught, also it’s not often a fire extinguisher and warning signs are located in most domestic households. Obviously courses have to cover all aspects but I think there are some areas many colleges miss out on.
Personal health is very important in this day and age, anything that could make your job more productive, improve the finish or most importantly produce longer term health benefits is definitely worth looking at. Having employed various apprentices I have seen some of the course work they need to complete. Some of it is very dated when it speaks of manual sanding or scraping of old lead based paints and recommends the use of a paper dust mask I think times have moved on.
Due to a rise in respiratory system diseases we need to reduce the amount of dust and debris ingested into our lungs and bodies as we carry out our work, one of the best ways to achieve this is to remove as much of the contaminates as possible through a dust extraction system.
Over the last few years there has been a rapid rise in the availability of dust free sanders with some very good systems being introduced from names such as Festool & Mirka. Both these manufacturers have top of the range sanders and dust extraction systems, although with the exception of the Mirka handy, a manual sander and hose for any vacuum cleaner predominantly their systems are fairly expensive.
I therefore set about seeing if I could organize a backup system for my own Mirka for a fraction of the cost. Alright I cheated as I already owned the extractor I was going to use on my budget system, good old faithful Henry.
But contrary to popular belief as despite contributing to a review site where you might expect I’m given things for free to receive favorable reviews, I researched and purchased the items without anyone’s knowledge of my purpose.
It did take several nights of reading various retailers review threads to decide which was going to be a suitable test subject. After a bit of deliberation I choose not one but two sanders from Screwfix for just under £50 which I thought was very reasonable.
Having owned and used these sanders for almost six weeks now I am pleasantly surprised by what you get for your money. Admittedly you need to fabricate a bit of an adapter to make the extraction work but there is a little short pipe that Henry comes with that serves this purpose, even if you wrap a bit of insulating tape around for added tightness.
Both sanders seem fairly powerful, the orbital one has five speed setting which can be useful. They are both a little heavier and probably noisier than their more well know rivals, but for occasional use it’s not to laborious. I have tried using both for various tasks many decorators will encounter to gain a broad spectrum of their capabilities.
Having initially used the orbital to abrade coatings of two oak tables for restoration and subsequently the detailed sander on the more intricate areas, they performed well on the first outing. Since then I have done various walls and woodwork areas.
As they both have the hook and loop fastening system a variety of abrasive papers can be used from standard Flexovit in the usual grades right through to Mirka Abranet which can be cut into shape for the detailed sander and purchased in the correct 125mm size for the orbital.
Pros
Very cheap entry machines for almost dust free sanding
Ability to attach various abrasive papers
Quite powerful considering cost
Variable speed on Orbital
Cons
Bit heavier or noisier than established brands
No dedicated Hoover attachment as standard
Conclusion
For the sixth of the price or either a Mirka or Festool “head unit” I managed to purchase both these useful sanders, if you can overlook their short comings of being a bit heavier to hold and manoeuvre and the additional noise, which isn’t to obtrusive theses are certainly worth a look as a step towards healthier sanding . I will continue to use mine perhaps a couple of times a week and test the longevity of both sanders but if they are connected up to a half decent hoover such as a Henry they are certainly better than nothing. Fifty pounds investment to the future of your lungs can’t be bad thing really.
Since writing this article the little Titan detailed sander eventually gave up the ghost, at first it was under guarantee and replaced with no quibble from Screwfix, on the second occasion I upgraded to this Erbauer.
Certainly powerful enough for many jobs and as before can use a variety of abrasives. Only minus point is there is not facility to attached it to a hoover, which makes it rather obsolete in this test, although I actually use it for externals and occasionally fine sanding internally to perhaps key a surface, where there isn’t going to be as much dust, just a quick run over with a hoover afterwards.
There are now many ways to achieve a “dust free” sanding set up, even on a budget, I focused intentionally on machines under £40 to see what they are capable of. Having done so I would not disregard any of the machines I have tried as good entry level tools.
Ok let’s be totally up front and honest here, this isn’t really a new tool. It’s a bold copy of our old friend the Wall-wiz. Nothing wrong there I hear you say, if Wall-wiz has gone out of production fair play to Coral for reintroducing a replacement copy.
Short Description
These types of tools do have their uses admittedly, although I sometimes think they are not as versatile as the manufacturer would suggest. Perhaps it’s only because I am such a dinosaur I still like to use my papering brush when hanging the majority of wall coverings.
Using a cutting guide to knife wall papers probably started with the use of an artex caulking tool and things have evolved from there. The Coral Paperwiz and its predecessor the Wallwiz introduced these standalone tools which have been designed to replace at least three traditional ones.
I find it will only work as a replacement for my papering brush on certain smooth surfaced papers, hard wearing vinyl’s are quite good and recently the current trend of paste the wall papers seem to work ok if smoothed with the Paperwiz.
In my opinion it’s no use on textured wallpapers or those which go very soft when soaked as it can take the surface of delicate papers, where a soft papering brush can be used gently.
Not sure about its suitability as a seam roller, rubbing a hard piece of plastic over a seam on some papers would just shine the seam like many plastic seam rollers used to.
The Paperwiz’s final trick is it can be used as a cutting guide, yes despite it being fractionally thicker than the original Wallwiz which in turn was thicker than most plastic caulkers, I like it, I like it a lot.
I always reach for the Paperwiz now when wallpapering, recently I hung some paste the wall paper and never used my papering brush once, just Paperwiz’ed for smoothing on and cutting guide.
Admittedly as a cutting guide you need to pay attention, push the Paperwiz into the desired position and get the blade of your knife resting right against the curve at a slight angle so you get a close cut, but once your there you can create straight consistent cuts every time.
As decorators it’s also fun that these come in a range of translucent colours, bringing a bit of fun into our tool boxes which I applaud.
Pros
Lightweight translucent design
Solid Construction
Tactile feel
Fun Colours
Cons
Trimming guide edge takes practice
One radius corner adequate.
Conclusion
Priced at under £5 from various outlets there is no reason why everyone who hangs wallpaper should have one of theses in their kit, even if you only use it for one of its multitude of abilities it would be a worthwhile addition. Easy to use, easy to keep clean and useful little product
Here is a little of our history, more to follow naturally. Time is progressing on once more and our little website has received another minor update so I am reviewing my blogs and updating them as we go, please excuse me if you’ve seen them before.
As this was my very first real blog on here I thought I would start by looking back a little, my apprenticeship started in 1983, my Dad had just bought the little Mini van in the picture. When he signed the van up it was just done as Vic Wilkinson I wasn’t even allowed a mention at that time. In the following years we progressed onto slightly bigger vans as you can see.
We are with you in all weathers for all your decorating requirements,
V. Wilkinson & Son are entering their 50th year in 2018, we shall look forward to working with our customers bringing their decorating ideas to reality.